Monitor arm for tft monitor ma-52C monitor arm for tft monitor



Dovnload 14.85 Kb.
Datum20.08.2016
Grootte14.85 Kb.


MA-52C monitor arm for TFT monitor




Disclaimer



  • We spared no efforts to make sure that the information in this manual is correct and complete. However no liability is accepted for any errors or omissions. Gembird Electronics reserves the right to change the specifications of the hardware and software described in this manual without prior notice.

  • No part of this manual may be reproduced, transmitted or translated in any language in any form, by any means, without the prior written permission of Gembird Electronics Ltd.

  • Gembird Electronics makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the product, the software, personal computers or peripheral devices.

Gembird® is a registered trademark of GMB Tech (Holland) bv.

Other names or products not mentioned above may be registered trademarks or trademarks of their respective owners.
Copyright © 2007 Gembird Electronics Ltd. All rights reserved.

MA-52C User manual

Introduction
Thank you for buying the Gembird® monitor arm for TFT monitor! This manual will help you install and use it properly.

Features



Specification


  • Monitor weight: up to 6kg

  • Two mounting options: 75x75mm and 100x100mm

  • Material: aluminum

  • Sizes: 438x114x114mm

  • Net weight: 2.1kg


Arm overview



  • Meet VESA standard, two mounting specifications are provided: 75x75mm and 100x100mm

  • Monitor weight: up to 6kgs

  • Screen pivots 180° up and down (upward 90° and downward 90°, left and right swivel angles total are 180°

  • LCD monitor swivel angle: 270°



Adjusting view angle



Adjusting Universal Joint Tension
When assembling the arm with monitors of differing weights, you may find that the tension of the universal joint needs to be adjusted to ease movement or to maintain the desired monitor position. If so, adjust as follows:

  • Remove the four plastic universal joint covers

  • Find the nylon nut (not the screw head) and use the included wrench to adjust the tension

  • Use one hand to support the monitor and adjust the tension of the universal joint Clockwise: more tension, Counterclockwise: less tension

  • When the desired tension is achieved, replace the four plastic covers




Caution:

Support the monitor during the adjustment procedure.

Only adjust the nylon nut (not the screw head).

Do not disassemble the universal joint.









De database wordt beschermd door het auteursrecht ©opleid.info 2017
stuur bericht

    Hoofdpagina